Laser cut from 1/4 inch steel, the wrenches are case hardened and nickel plated for durability. These wrenches are designed to fit the large and small spanner nuts on the 1960-1976 Mopar power steering boxes. When rebuilding these boxes, those 2 nuts need to be torqued to 250 foot pounds . . . try doing that with a hammer and punch.
We designed these with 12 inches of extra leverage so you can set your standard 150 foot pound torque wrench to approximately 140 ft. lbs. Detailed instructions are included to help you set your wrench properly. Don’t try to rebuild your steering box without these!